Work

1.Poster Siena,
2.submitted phisym with thresh 160/930

3. Laser corrections :

/afs/cern.ch/user/a/argiro/scratch0/phisym-lasercorr/CMSSW_2_1_4/src/testLaerCorr2.py
opening file...

Work

1. exercise to complete laser correction.
Done in
/afs/cern.ch/user/a/argiro/scratch0/phisym-lasercorr/CMSSW_2_1_4/src
testLaserCorr.py
waiting for FC to tell us which Tag to use

2. script to do phi symmetry analisys automatically , launched one. Problems finishing
up ?
Solved, script works fine :scratch0/csa08/CMSSW_2_0_7/src/Calibration/EcalCalibAlgos/scripts-s43_plus_s156/launchanalisys.sh

3. back to DB <-> xml problem
test Vincenzo's script w0/CMSSW_2_1_9/src/CondCore/EcalPlugins/test/inspect.py
don't understand if it is working or not

work

1. try high e>190(710) et<5GeV on csa08-s43 sample 1pb-1
count number of hits also MR spans from 2% to 3.2%

In ring 0 on average 3174 hits each crystal
pccmsto03:/data/argiro/phisym/20080919-1

THIS HAS TO BE REDONE: superposition of old et sums ?

2. now try the same on s43+s56 sample
3934 hits ??? bug fixed...

Work

phisym on simulation:
another try with phi sym

e>150 and et<>650 and et<15GeV EE

Moving the high threshold does not affect the residual miscalib nor the k factors

Test DQMPi0

DQMOffline/CalibCalo V00-00-04 needs AlCaRecoStream_EcalCalPi0Calib_cff.py v 1.4
in latest IB (tested).

Work

CCS, prepare presentation phisym for DPG

1. Run phi symmetry from scratch0/csa08/CMSSW_2_0_7/src/Calibration/EcalCalibAlgos/
Corrected in the code inconsistencies et/ e plain. Now low threshold is based on e alone,
high threshold on et. Thresholds: barrel 190, endcap 750. Also fixed bug in k calculation
for endcap. Saved to pccmsto03:/data/argiro/phisym/20080916-1 . MR in barrel is still 2.2%
2. Run with lower thresholds 150 and 650 on csa08-1pb . MR in EB goes down to 1.6% but
not as low as the 1.1-1.2 observed earlier. Saved in pccmsto03:/data/argiro/phisym/20080916-2
3. Run with lower thresholds over s43+S156

./csa07_submit.py -c csa08PhiSymCalibration-lowthres.cfg.tmpl -r csa08-s43-s156.flst -e log -n 80
basically same MR results as before









4. Run with cut in et: etbarl >150/coseta etee>650/coseta : MR in endcap goes down
again to (starting from ) 1%. Note the bump around ring 60 is present only if we cut by et,
not by energy.

Work week of 9/11

1. Refactoring of Phi symmetry calibration steps. Status: EtSum Accumulation
completed but not tested, Calibration step started

2. Work on PopCon app. Tested write to sqlite file of Intercalibconstants. Written
Todo: commit to CVS, finish Popcon handlers. Test readback. Questions on "tag","since":
read from header or

3. continue studies of shower shapes for phisym. looking at most energetic xtal in event
does not change behaviour (e1/e5) increases with energy

Work

Began refactoring of phi sym code: seprate producer from algo, encapsulate
at least constants, separate et accumulation from actual calibration algo

Work

1. Test Hcal Isotrack AlCa stream
2. cont'd studies with shower shapes, see scratch0/phisym-devel/CMSSW_2_0_12/src/Calibration/EcalCalibAlgos/data/e1e5.root . No difference if I take only rh above thresholds (but there is a selection in the alca stream ...)

Work

Shift @ P5

Work

1. Move csa08 s45 exercise to pccmsto03:/data/argiro/phisym/csa08-1
2. Use S1/S5< 0.9 in phi sym to select showers and reject noise . In w0/phisym-devel/CMSSW_2_0_12. Used 20x series to be able to use csa08 data, but backported clustertools from 21x
   
3. documented dqm in https://twiki.cern.ch/twiki/bin/view/CMS/DQMCalibEcal
   

Work

1. Discussion linearity
2. Talk with students

travel to Cern